Proper Wand Technique

 Pressure washing is a powerful and efficient way to clean a wide range of surfaces, including concrete, brick, and other building materials. However, to achieve the best results and avoid causing damage, it is important to use the proper pressure washing wand techniques. We will explore some of the key considerations and techniques for using a pressure washing wand to achieve the best results and ensure the longevity of the structure. So, let's get started and learn how to properly use a pressure washing wand for the best results.

1. Try to hold the wand close to your body. This will help avoid fatigue and distribute the vibration throughout your body instead of directly into your hand.

2. If you are pressure washing for extended periods of time, consider securing the trigger with a velcro strap and utilizing a ball valve to turn on and off the water flow at the wand. This will help avoid fatigue and reduce the risk on early onset carpal tunnel. 

3. Do not engage the pressure washing trigger while pointed directly at the surface that needs to be cleaned. Even the most seasoned pressure washing experts can misjudge distance, forget to secure a nozzle or perform an number of acts that can lead to damaging the surface. Instead, point the nozzle away toward an area that will yield minimal damage. Engage the trigger and slowly bring the spray toward the surface in a sweeping motion.

4.  Use long, slow, continuous strokes at an even distance from the surface. This will minimize any differences in cleaning from stroke to stroke.

5. Wear protective eyewear when cleaning into steps or corners. Debris has a high likelihood of ricocheting back on these angles surfaces. If possible, never shoot directly into the angle but instead, stand off to the side and spray.

6. Adjust your equipment for the job regularly. There is rarely one nozzle that will be used for the entire job. Utilize your experience and the variety of tools at your disposal to get the job done right and safely.

7. Perform test on areas that are more obscure before applying pressure to the entire surface. Start with a lower pressure and increase as needed.